Getting close....

So the treadle loom is nearing completion.  I have a few more parts to get the finish on.  I am limited to space for putting finish on items so it is time consuming.  Mostly it's just the pegs and the pawls that need the finish.  Today I'll get the loom strung up so tomorrow I can do a test weave.  The treadles are different on this loom so wish me luck that I've got it right! 

New Treadle loom will be done soon!!!

Finish is on all the the loom parts. Running the heddles and tools today and putting first coat of finish on the heddles. :) getting really close now. :)

Final dry fit on Treadle Loom

The legs are all complete and set so today I did the final dry fit on all the major body parts.  Lots more to do but these parts will now start getting a finish. 

More progress made on the Cherry and Purpleheart 2 Treadle Loom

ll parts are sanded now and a few more made so all that is left to make are the heddles and tools. I'm gluing up the leg assemblies today. Yesterday my son visited as he normally does on Saturday. :) (Yes, I'm a lucky mom :) ) I did run the warp cage reel parts yesterday morning so those are done and I rand the take up rod and the warp cage rod today. I built her again before I did the leg glue ups and all looks good. Once the legs are good and dry tomorrow I'll do one more build and check that all is good. I need to sand the leg assemblies a bit then I will get started on getting a finish on her. While I'm doing the finish I will run the heddles and tools and get them ready. This one is close to done.
I did also get a walnut top glued up so the next one will be all walnut. I may do some parts in another wood but I haven't decided yet. I'll have to see what I can get.

Treadle Tape Loom Update 3

Today I was able to do a ruff assembly check.  All looks good and tomorrow I will sand all the parts and get the threads in the bottom of the top assembly parts.  If all goes well then I will be able to start the finish on these parts.  Next up will be the warp cage and take up rod assemblies and the heddles and tools.  Since there isn't much room for me to put a finish on all the parts at once these parts will get their finish after the first parts are complete.  Anyway that's the update.  :)