Easiest DIY Dowel Centering Jig EVER

Sometimes us DIYer's are self taught enthusiast.  Whether you are a DIY welder, woodworker or any other handcraft-er of sorts, you are probably like me in thinking "there must be an easier way"!
I had this "brilliant" idea (I always do) :) to make bobbins/spools like the vintage ones you can purchase on Ebay (if your rich and famous) and fill them with 5 yards of quilt binding. Because this idea is for the boutique project I've been involved in this past year I was determined to make these bobbins because the price of the vintage ones are too high to make any sort of profit on.  So I set out to make my own.  Now of course they will not be vintage but since even the vintage ones are so hard to come by I decided that ladies/gents that sew would love to be able to purchase replica bobbins with bias tape.
Okay so I made my first one.  It took me forever to figure out how to get the hole all the way through the dowel and have the hole in the center of the dowel...  Drilling a hole in a dowel straight is another story in itself and this post is not about that, it's about finding an easy way to mark the center of the dowel without a lot of marking with a pencil.  I found plans for jigs that you could use to scribe lines all the way around the dowel to get the center point. YUK  Since it is my intention to make 50 of these spool (I think they will be a good seller....hoping) this method was too time consuming and I hated having to draw all these lines over and over again.  So....  I began thinking about it...and this is so easy you'll want to kick yourself in the butt if you have ever tried any of the other options available on the internet for getting the center of a dowel!

Okay, finally I'm getting to the part you are probably waiting for, HOW to do it.
You have to have a forstner bit the size of the dowel you are wanting to mark the center of; one like this:

Then you need to get a piece of scrap wood at least slightly larger than your bit and at least 3/4 inch thick.

Using your forstner bit drill through your scrap piece of wood until the point (see the point on the bit above) barely comes through, leaving a tiny pin hole that can be seen on the other side of the wood where you did not drill.

This is a piece of 1x2 scrap pine I had from making a raddle (weaving tool) it is not necessary to have a dado cut into your wood, it's just a scrap piece I had and the dado wasn't a problem for this application so I used it.  In the picture below can you see the tiny hole left on the other side of the wood by the forstner bit?

Now, believe it or not your jig is complete....  place your dowel that is the same size as your forstner bit into the hole you made then using a small nail gently hammer that nail through this tiny hole into your dowel just enough to make an indentation, this is your CENTER YAAAAAA.  The indentation the nail makes will also help you when you begin to drill the hole you need in your dowel because your drill bit will not veer off course as easily.

Here I am placing my dowel into the jig, then I will flip it over.

Here is the jig with the dowel in it and flipped over.  I've placed a nail in the tiny hole and hammered gently enough to make a mark but not so much that I have to use a claw hammer to get the nail out.

Here is my perfectly centered hole in my dowel...YAAAAAAA

Now, even though this post is not about drilling the hole in your dowel, I thought I'd share another tip with you.  You can use this same jig to hold your dowel upright and straight for drilling your hole.

Now having said that, there is one exception.  If you have an awesome drill press that will actually drill a hole all the way through your dowel (I don't, I have to turn my dowel over and drill again to make a hole all the way through a dowel longer and a couple inches or so) then you will not want to use your jig to hold your dowel in a straight upright position, you will want to make another jig using the same forstner bit to hold your dowel upright and straight to drill your hole.  By the way, if you have a drill press that will drill all the way through your dowel...I AM JEALOUS!  :)

So here is my project started, in this item for sale there will be this rack made using Home Depot rulers that will have picture hangers on the back so it can be hung if desired and 5 or 6 spools (haven't decided yet) filled with 5 yards of bias tape on each bobbin/spool in different colors.  I think (still thinking about it) I'll leave the spools unfinished so customers can finish them if they want or not if they don't.  I have considered putting a color wash on them that will match the bias tape but that is more work so....thinking, always thinking.

This is the first spool I made before the centering jig...if you look closely the hole is NOT centered.  :)  mistakes always seem to inspire creativity don't you think?

If you agree, please sign

Pumpkin butter, pumpkin bread and pumpkin pie OH MY.

I love this time of year.  All the special dishes and deserts that are made.  The house smells so good from the holiday cooking.  It's the time of year where our family and friends get together for a bit of good food and conversation.  I am so looking forward to giblet dressing!  It's my favorite part of Thanksgiving.  I never tell anyone what is in the dressing, and I always get so many praises on how great the dressing is.  Why ruin a good thing for people who are afraid of gizzards!  To me, well you can't have a good dressing without them.

Anyway I know it's a bit early but I'm already getting ready for Thanksgiving.  Every year I made my special pumpkin butter, pumpkin bread and pumpkin pie (made using the pumpkin butter) for the neighbors.  Five of my neighbors get a loaf of the pumpkin bread with the pumpkin butter of course and a pumpkin pie.
I've made the pumpkin butter, you can also make this delicious treat too if you like.  The recipe is listed on the right hand side of this blog page along with the pumpkin bread and pumpkin pie recipes, all of which are so scrumptious!

Making your own thank you cards!

I don't know about you but I absolutely love getting handmade cards.  I rarely get them in the mail these days but years ago people did send letters in the mail and sometimes you'd be lucky enough to get a note from a creative friend that took the time to hand make the note card!  On the other hand there are people like my husband that when he gets a homemade card he will accuse you of forgetting to get the card from the store and had to make one at home....I laugh at this, cause it's so hard to believe there are people that don't have an appreciation for ALL things handmade!
Years ago, maybe 10 or so, a friend dragged me to a card making bee of sorts.  I'm ashamed to say I do not remember what friend it was.  We made three cards and that was my first group project ever.  I had fun but never have done too much with card making.  Since I have so many hobbies I only make thank you cards and the occasional birthday card for the most part.  Here lately I have been making note cards that I write little notes in for my niece who is currently deployed.
Well as the boutique workshops are winding down and the end of this year and a half long project is almost over, I decided to make handmade thank you cards for all the wonderful ladies that attended our workshops.  We have been so blessed with so much participation that I had many cards to make.  I found this video on YouTube for the cutest thank you card and decided I'd set out to make this card.
Here is the video:

The unfortunate thing was, I didn't have the Cricut cartridge "Country Life" so I had to go get that and I didn't have the cute rubber stamp "Thank you sew much".  I wasn't able to get that stamp because it was retired, but I made due with a "Thank You" stamp I already had. I also had to get a couple Tim Holtz rubber stamps, I was so glad they were not retired!  This project took nearly two whole days to complete.  I had 45 thank you cards to make! The little sewing machine took the longest to make because there are so many tiny pieces to it.  It would have been less time consuming if it wasn't a Cricut project, Sizzix dies would have been so much faster. Here are pictures of a few of my finished cards...I couldn't make up my mind on the design.

I ended up choosing the one on the left but using brown ribbon instead of the tape measure ribbon.  Adding thread and a needle to the spool was just too time consuming since I had so many cards to make.

Here are some more pictures and close up's of the cards.  Also a picture of the huge mess card making makes!  I had to use my spare bedroom for this project because I already had a project going in my sewing room.  It was a bit tight but with two tables it worked out fine.  The mess is cleaned up now but I've left the tables and machines in the room for when I make my Christmas cards in the next couple weeks.  (Hoping to find time!)

I used my printer for the sentiment on the inside of the card.

Here is a box full of some of the cards.

Here are the tiny pieces needed for the sewing machine.

Here is the mess....

This would have been a faster machine to use!  I did use it to make my niece a thanksgiving card with a pumpkin on the front!

Another pile of junk!

The good news, everything is cleaned up, all dies are back in their boxes and this mess above looks like I was never in that room except to set up some tables and my machines ready for a project!  :)  

This is hilarious!

If you remember, my son adopted a little Min Pin named Artemis.  Well of course he is spoiled rotten.  I get to dog sit often and have fallen in love with this crazy little dog.  He loves to wear cloths, he is the nosiest little bugger I've ever met and he is absolutely hilarious!  My son sent me these pictures and I nearly peed myself laughing so hard!  Here is Artie in all his glory...

Can you believe they caught a picture of him in his P.J.'s yawning????

WT HECK ????

Sleeping with his tongue hanging out????

So adorable!

He makes the weirdest faces...what is he thinking here?